Surge Protectors

Eaton PSF10I, Input voltage (Uc) 200-250VAC 1 Phase, Max Continuous Voltage 285VAC L-N, 2 Port, Portable, 300VAC L-N, 15 mins, 40dB nominal above 1MHz, 3 mode, 3 Stage Protection. The Eaton 10 Amp Surge Protector / Inline Power Filter PSF10I is a 3-stage protection surge protector utilising high kA primary and secondary MOV protection in conjunction with an L/C filter.

Eaton PSF16I, Input 200-250VAC 1 Phase, 2 Port, Portable, 300VAC L-N, 15 mins, Residual current< 0.5 mA, 40dB nominal above 1MHz. The PSFI is designed to provide secondary protection against power surges caused by external sources such as lightning strikes & substation switching, as well as providing a measure of protection from surge events generated on the secondary side of the filter.

Eaton SF8RM, 1u 10a Aust 3 Pin, Input Rack Mount, Operating voltages 220-275vac. The Eaton SF8RM is an IEC, Class III, rackmount 1RU, 8 way, Aus socket, plug pack spacing, dual mode filter and surge protector.  It is designed to protect equipment against surges and electrical noise whilst providing a convenient combination of power outlets to suit most applications. 

Eaton SPD3200-TN-E, 3 Phase 200ka 3 Mode Alarm Common Mode, Input 380-440vac 3P, Operating voltages 380 – 440vac 3 phase, Microprocessor control design, Provides portable power. The SPD3200-TN-E is designed to protect three phase power systems against damage from surges and spikes caused by lightning and other electrical sources. The unit is intended for point of entry or main board protection and is connected in parallel with the power system via its own safety disconnect MCB.