Interfaces :- |
|
Telephone Interfaces |
Two (2) RJ11 FXS ports |
Network Interface |
One (1) 10/100Mbps auto-sensing ethernet ports (RJ45) |
LED Indicators |
POWER, INTERNET, PHONE1, PHONE2 |
Factory Reset Button |
Yes |
Voice, Fax, Modem :- |
|
Telephony Features |
Caller ID display or block, call waiting, flash, blind or attended transfer, forward, hold, do not disturb, 3-way conference |
Voice Codecs |
G.711 with Annex I (PLC) and Annex II (VAD/CNG), G.722, G.723.1, G.729A/B, G.726, iLBC, OPUS, dynamic jitter buffer, advanced line echo cancellation |
Fax over IP |
T.38 compliant Group 3 Fax Relay up to 14.4kpbs and auto-switch to G.711 for Fax Pass-through |
Short/Long Haul Ring Load |
2 REN: Up to 1km on 24 AWG |
Caller ID |
Bellcore Type 1 & 2, ETSI, BT, NTT, and DTMF-based CID |
Disconnect Methods |
Busy Tone, Polarity Reversal/Wink, Loop Current |
Signaling :- |
|
Network Protocols |
TCP/IP/UDP, RTP/RTCP, HTTP/HTTPS, ARP/RARP, ICMP, DNS, DHCP, NTP, TFTP, SSH, STUN, SIP (RFC3261), SIP over TCP/TLS, SRTP, TR-069 |
QoS |
Layer 2 (802.1Q VLAN, SIP/RTP 802.1p), Layer 3 (ToS, DiffServ, MPLS) |
DTMF Method |
In-audio, RFC2833 and/or SIP INFO |
Provisioning and Control |
HTTP, HTTPS, SSH, TFTP, TR-069, secure and automated provisioning using AES encryption, syslog |
Security :- |
|
Media |
SRTP |
Control |
TLS/SIPS/HTTPS |
Management |
Syslog support, SSH, remote management using web browser |
Physical :- |
|
Universal Power Supply |
Input: 100-240VAC, 50-60Hz
Output: 5.0VDC/1.0A |
Environmental |
Operational: 32º – 104ºF or 0º – 40ºC
Storage: 14º – 140ºF or -10º – 60ºC
Humidity: 10 – 90% Non-condensing |
Dimension and Weight |
100mm x 100mm x 29.5mm, 114g (without package) |
Compliance |
FCC 15B, AS/NZS CISPR22, AS/NZS60950, EN55022, EN55024, EN60950, EN61000-3- 2, EN61000-3-3, UL (Power supply)
K.21 |