Image Sensor |
1.0-type back-illuminated Exmor R CMOS sensor |
Image Sensor (Number of Effective Pixels) |
Approx. 14.2 Megapixels |
Image Sensor (Total Number of Pixels) |
Approx. 20.4 Megapixels |
Signal System |
1080/59.94p, 1080/59.94i, 720/59.94p, 1080/50p, 1080/50i, 720/50p, 1080/23.98p |
Minimum Illumination (50IRE) |
1.7 lux (50IRE, F2.8, 1/30s, Max.Gain) |
Horizontal Resolution |
850 TV line (in 3G-SDI output) (center) |
Gain |
Auto/Manual (-3dB to +33dB) |
Shutter Speed |
1/10000s to 1/8 (59.94/29.97), 1/10000s to 1/6 (50/25/23.98) |
Exposure Control |
Auto, Manual, Priority mode (shutter priority, iris priority, gain priority), Back light, Spot light |
White Balance |
Auto1/Auto2/One Push/Indoor/Outdoor/Manual |
Optical Zoom |
12x |
Clear Image Zoom |
2x |
Digital Zoom |
No |
Tele Convert Mode |
Off, 2x (1920x1080 only) |
Focusing System |
Auto/Manual |
Horizontal Viewing Angle |
64.6° (Wide-end) |
Focal Length |
f=9.3 to 111.6mm F2.8(Wide), F4.5(Tele) |
Minimum Object Distance |
1000mm (Tele), 80mm (Wide) |
Pan/Tilt Angle |
Pan: ±170°, Tilt: +90°/-30° |
Pan/Tilt Speed |
Pan: 0.3° to 60°/s *1, Tilt: 0.3° to 60°/s *1 |
Pan/Tilt Slow Mode |
Yes |
Pan/Tilt Operation Noise |
NC30 or less (Sony measurement conditions) |
Preset Position |
100 |
PTZ Trace Memory |
16 |
PTZ Motion Sync |
Yes |
Camera Tracking Data Output |
Yes (Requires firmware V2.10) |
Camera Features |
Day/Night, Visibility Enhancer, Image Flip On/Off, Picture Profile Preset |
ND Filter |
Off, 1/4, 1/16, 1/64 switchable in menu |
Color Gain |
Yes (15 step) |
Color Hue |
Yes (15 step) |
Color Matrix |
Off/Standard/High Saturation/FL light/MOVIE/STILL/CINEMA/PRO/ITU709/BW |
Gamma |
Standard/Straight/MOVIE/STILL/CINE1/CINE2/CINE3/CINE4/ITU709/Pattern |
Gamma Level |
Yes (15 step) |
Black Level |
Yes (97 step) |
Black Gamma |
Yes (15 step) |
Knee Point |
Yes (13 step) |
Knee Slope |
Yes (15 step) |
Flicker Cancel |
On/Off |
Interface |
4K Video Output: No, HD Video Output: 3G-SDI x2 and HDMI |
HDMI Color Space |
YCbCr, 4:2:2, RGB, 4:4:4 |
Camera Control Interface |
VISCA RS-422, RJ45 (In/Out), VISCA over IP RJ45 |
External Sync. Input |
BNC, 75Ω, HD 3-level sync, SD Black Burst |
Power Connector Type |
IEC60130-10 (JEITA standard RC-5320A) TYPE4 |
Power Requirements |
DC 10.8V to 13.2V, PoE+ (IEEE802.3at compliant) |
Power Consumption |
DC12 V: 19.0 W (Max), PoE+: 23.0 W (Max) |
Operating Temperature |
0 °C to 40 °C (32 °F to 104 °F) |
Storage Temperature |
-20 °C to +60 °C (-4 °F to +140 °F) |
Dimensions (W x H x D) |
Approx. 198 x 260 x 238mm (without projecting object), Approx. 7 7/8 x 10 1/4 x 9 3/8 inch (without projecting object) |
Mass |
Approx. 4.3kg (Approx. 9 lb 7.7oz) |
Optional Card Slots |
Not needed |
Body Color |
Black and White |
Size of Screw Hole for Tripod |
1/4-20UNC x2 |
Mountable Angle |
Less than ±15 degrees |
Ceiling Mount |
Yes |
Supplied Accessories |
IR Remote Commander Unit (1), Ceiling bracket (2), Wire rope (1), Screws(M3 x 8) (7), Screws(M4 x 8) (1), HDMI cable fixing plate (1) |